![]() In this setup a pressure switch on the pressurised rainwater pipe network is wired to the rainwater control panel contact (marked "Operation") which determines pump operation. The panel can be used for rainwater harvesting systems where the supply from the submersible or dry-standing centrifugal pressure pump is piped directly to the various points of use. The rainwater harvesting control panel OMNI Pluvia Eco P - 230V including motor-protection for 1x rainwater pump with an electric consumption of 6.3A to 10.0A enables automatic rainwater supply and allows monitoring of the rainwater harvesting system.ĭirect Pressurised Rainwater Supply System Pump Operation indicated via LED 1 (Green)ĭry-Run Detection/Tank Empty indicated via LED 2 (Yellow)Īlarm-output (potential-free): for BMS (max. Motor-Protection (Overload, Short Circuit, Phase Malfunction)ĭry-Run protection with external Float-Switch (4x core additional accessory) Manual-OFF-Automatic Switch (Manual pump operation possible) MULTIGO M40/12, M40/15, M80/12, M80/15)ĭimensions: 175 x 250 x 150 mm - glasfibre reinforced - IP 63Īutomatic operation with external pressure-switch/float-switch (additional accessory) ![]() ![]() To operate 1x rainwater harvesting pump | duty/standby | Automatic Rainwater Harvesting Control Panel ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |